MENU

Products

Box making machine
GTS SERIES Twin Head Semi-Auto Stitcher
GTS-2400DS/GTS-3000DS/GTS-3600DS

Double servo motors coordinates to control stitching and feeding pitch, solve that tradition brake clutch to be fault rate high, over come a crank rockers mechanic that is unstable shortcoming completely; the first and final pitchs both can compensate by window setting to get perfect performance; Change cutting knife can get different length of nail to fit requiring for single wall or double wall. Simple installation without special foundation.

Specifications

Type GTS-2400DS GTS-3000DS GTS-3600DS
Stitch Speed 350 Stitches / Min
Stitch Pitch Min 10 mm (Adjustable)
Stitch Number 3-99 stitches
Box Type Two pieces type or Single piece type
Stitching wire □1.8mm width x 0.7mm thick □2.4mm width x 0.6mm thick
Max. Product Width 2400 mm 3000 mm 3600 mm
Horsepower 18.75 HP
Machine Weight 4000 Kgs 4500 Kgs 5000 Kgs
Dimension of Machine 3956mm(W) x 1637mm(H)
x 6898mm(L)
4556mm(W) x 1637mm(H)
x 6898mm(L)
5156mm(W) x 1637mm(H)
x 6898mm(L)

Layout

Size & Stitching Type

Feature

Independent rear-stoppers available for special type box.



HMI operate interface is conversational to set up, and error message offer easy way for operator to do trouble shooting and maintenance.

The interval of feed-belts is adjustable to feet different thick of sheet.



Hydraulic rising feed table control by pedal switch to keep suitable height for operation.



Timing belt is high effect and low noise to transfer power. Gear connect shaft by power-lock without key. That is long life for high frequencies transfer power type.

Rubber-roller feeding is designed for high quality color-box. That will not to injure box's surface when it be fed for stitching. (Option)

Auto wire-feeder can supply for large wire coil (30 kg). This will increases producing effective and reduces frequency installing wire times. (Option)


All operation functions are controlled through a programmable logic controller. The machine has been passed CE safety measure identification.



"The stitching head is made by alloy steel and ground accurately; the patent Swing Forming can improve the speed of stitching and lengthen the lifespan. Easy changing operation for one piece and two pieces."