GAFT SERIES Fully Auto Feeder (Top)
- Hydraulic drive cyliner id powerful and safety.
- Side and front pneumatic joggeng for sheets squaring.
- The shingle gate is operator adjustable for speed or condition of board.
- Continuous type feeding, send the continuous few paper to Flexo, and extend the life of feed roller.
- Hydraulic set with low-noise, highly effective and less maintenance.
- Prefeeder belt speed depend on the Flexo can be adjustable.
- Stretchable feeding table with assistant control box offer convenient operation.
| Type | GAFT-6 | GAFT-7 | GAFT-8 | GAFT-9 |
| Max. Sheet Size (mm) | 900x1800 | 1000x2200 | 1200x2500 | 1500x2800 |
| Min. Sheet Size (mm) | 190x350 | 220x500 | 250x560 | 300x600 |
| Max. Load (kg) | 1600 | 1600 | 1600 | 1600 |
| Max. Stack Height (mm) | 1800 | 1800 | 1800 | 1800 |
| Max. Capacity (Sheet/min) | 400 | 380 | 350 | 330 |
| Power Required (HP) | 32 | 32 | 32 | 33 |
| Machine Weight (kg) | 9500 | 10000 | 10800 | 11500 |
| Type | GAFT-10 | GAFT-12 | GAFT-15 |
| Max. Sheet Size (mm) | 1600x3000 | 1600x3600 | 2000x4500 |
| Min. Sheet Size (mm) | 300x600 | 365x650 | 600x850 |
| Max. Load (kg) | 1800 | 2000 | 2000 |
| Max. Stack Height (mm) | 1800 | 1800 | 1800 |
| Max. Capacity (Sheet/min) | 300 | 200 | 160 |
| Power Required (HP) | 33 | 36 | 40 |
| Machine Weight (kg) | 12500 | 13200 | 13900 |
Gate
Flip Device
Pusher
"All operation functions are controlled through a programmable logic controller. The machine has been passed CE safety measure identification."
Hydraulic set with low-noise, highly effective and less maintenance.
Adjust stack center cylinder.
HMI operate interface is conversation to set up, and error message offer easy way for operator to do trouble shooting and maintenance.